Solvent Based Duct Sealant 1 gal. (Tan - Low VOC)

APPLICATIONS

DP 1090 is recommended for sealing joints, seams, duct wall penetrations in commercial and industrial applications, and supply and return rectangular, round, oval and metal flexible ducts.

A smooth, solvent based, premium quality, UL Classified, high pressure/high velocity duct sealant for commercial and industrial supply and return air duct use.

FEATURES & BENEFITS

• LEED V4 Qualified
• UL Classified
• Low VOC
• Meets Requirements of NFPA 90A & 90B, ASTM E-84, and UL-723
• Meets CDPH Emission Requirements
• California Compliant
• Excellent Water and U.V. Resistance
• Excellent Workability
• Crack and Peel Resistant
• Mold and Mildew Resistant
• Indoor and Outdoor Usage
• Minimal Shrinkage
• Sag Resistant
• PVS/PVC Steel Application
• Color: Tan
• Base: Solvent
• Chemical Family: Synthetic Elastomeric
• Solids Content: 68 ± 2%
• Viscosity: Approx. 120,000 - 180,000 cps
• Application Temperature: 0°F to 110°F
• Storage: Do not store where temperature exceeds 110°F or falls
• below 0°F. Optimum storage temperature at 60º F - 80º F
• Freeze/Thaw Stability: 5 cycles no deterioration (DPTM-20)
• Service Temperature: -20°F to 190°F
• Flammability: Extremely flammable
• Flash Point: Closed cup: -0.4°F (-18°C)
• Shelf Life: 9 Months (unopened containers)
• Cure Time: 24-72 hours depending on temperature, humidity, and
• application
• Coverage: Dependent on application thickness, 80-100 sq. ft. at
• approximately 20 wet mils
• Clean Up: Mineral spirits or acetone
• Packaging: 10 ounce tubes, 1 gallon pails
• Pressure Classes: Meets all SMACNA pressure classes
• Seal Classes: Meets all SMACNA seal classes
• VOC: 44 g/l