Carrier Comfort Multipoise Furnace, 92% AFUE, 120,000 BTU, 115/1

  • California Prop 65

The 59SC2D Multipoise Comfort™ Condensing Gas Furnace features SEER-boosting year-round electrical efficiency when paired with a compatible condensing unit. Energy efficiency is at the heart of this furnace with up to 92.1% AFUE gas efficiency and the electrically-efficient basic fixed-speeds, constant torque (FCT) ECM blower motor. This gas furnace also features 4-way multipoise installation flexibility, and is available in nine model sizes. The 59SC2D can be vented for direct vent/two-pipe, ventilated combustion air, or single-pipe applications. Units are design certified in Canada, and are certified for mobile/manufactured home use.



• Fixed-speeds, constant torque (FCT) ECM blower motor for electrically efficient operation all year long in heating, cooling and continuous fan operation.
• Single-speed inducer motor, and single-stage gas valve.
• Silicon Nitride PowerHeat™ Hot Surface Igniter.
• Adjustable blower speed for heating and cooling.
• Aluminized-steel primary heat exchanger.
• Stainless-steel condensing secondary heat exchanger.


• 4-way multipoise design for upflow, downflow or horizontal installation, with unique vent elbow for 12 different venting options, including optional venting through-the-cabinet downflow venting capability.
• Factory-configured ready for upflow applications.
• Ideal height 35” (889 mm) cabinet: short enough for taller coils, but still allows enough room for service.
• Direct-vent/sealed combustion, single-pipe venting or ventilated combustion air.


• Approved for Manufactured Housing/Mobile Home applications with MH accessory kit.
• Convertible to propane with gas conversion accessory kit.


• All sizes meet ENERGY STAR® South regional standards.
• Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193.
• All sizes can be installed in California air quality management districts with a 40 ng/J NOx emissions limit.

Fuel Type Natural Gas, Convertible to Propane
Stages Single Stage
Number of Burners 6
Maximum Pressure 13.6
Limit Control Range SPST
Ignition Type Silicon Nitride Hot Surface
Heat Exchanger Type Aluminzed Steel Clamshell
Gas Connection Size 1/2 - NPT
CFM Heating 1735
CFM Cooling 1800
CFM 2000
BTU Output 111000
BTU Input 120000
Blower Wheel 11 X 11
Blower Speeds Multi-Speed ECM
Blower Motor Type Fixed-Speeds, Constant Torque ECM
Blower Motor RPM 1200
Blower Motor HP 3/4
FLA 8.8
Hertz 60
MCA 9.7
Phase 1
RLA 8.8
Voltage 115
Safety Standards
California Prop 65 Yes
ETL Certified No
ETL Listed No
Leed Certified No
Shipping Point 46231
UL Listed No
Weights and Dimensions
Operating Weight (lbs) 127
Exterior Dimensions (D) (inches) 29.500000
Exterior Dimensions (W) (inches) 24.500000
Exterior Dimensions (H) (inches) 35.000000
Shipping Weight (lbs) 216.800000
Tier Comfort