Carrier 3.5 Ton, 15.2 SEER2 Package Rooftop Heat Pump, Two Stage, 208/3

Item
50VRK425
  • California Prop 65

Product Data

Single-Packaged Products with Energy-Saving Features and Puron® refrigerant.
• Up to 15.5 SEER2 / Up to 12 EER2 at 95°F (35°C) OD
• Up to 7.5 HSPF2
• Factory-Installed TXV
• Multi-speed ECM Blower Motor - Standard
• Sound levels as low as 69dBA
• Two Stages of Cooling/Heating
• Dehumidification Feature - Standard
• Cabinet air leakage of 2.0% or less at .5 in. W.C. when tested in accordance with ASHRAE standard 193. (Low leak FIOP modelsonly.)
Features/Benefits
One-piece heat pump unit with optional electric heater, low sound levels, easy installation, low maintenance, and dependable performance. Carrier’s unique refrigerant designed to be environmentally balanced.
Puron is an HFC refrigerant which does not contain chlorine that can harm the ozone layer. Puron refrigerant is in service in millions of systems proving highly reliable and is non-ozone depleting.
Easy Installation
Factory-assembled package is a compact, fully self-contained, electric cooling unit that is prewired, pre-piped, and pre-charged for minimum installation expense. These units are available in a variety of standard
cooling sizes with voltage options to meet residential and light commercial requirements. Units are lightweight and install easily on a rooftop or at ground level. The high tech composite base eliminates rust
problems associated with ground level applications.

Innovative Unit Base Design
On the inside a high-tech composite material will not rust and incorporates a sloped drain pan which improves drainage and helps inhibit mold, algae and bacterial growth. On the outside metal base rails
provide added stability as well as easier handling and rigging.
Convertible duct configuration
Unit is designed for use in either downflow or horizontal applications. Each unit is converted from horizontal to downflow and includes horizontal duct covers. Downflow operation is provided in the field to allow vertical ductwork connections. The basepan seals on the bottom openings to ensure a positive seal in the vertical airflow mode. Efficient operation High-efficiency design offers SEER2 (Seasonal Energy Efficiency Ratios) of up to 15.5 and HSPF2 of up to 7.5.
Durable, dependable components
Scroll Compressors have 2 stages of cooling/heating and are designed for high efficiency. Each compressor is hermetically sealed against contamination to help promote longer life and dependable operation. Each compressor also has vibration isolation to provide quieter operation. All compressors have internal high pressure and overcurrent protection.
Multi-speed ECM Blower Motor is standard on all models.
Direct-drive PSC (Permanent Split Capacitor) condenser-fan motors are designed to help reduce energy consumption and provide for cooing operation down to 40°F (4.4°C) outdoor temperature. low
ambient kit is available as a field-installed accessory.
Thermostatic Expansion Valve - A hard shutoff, balance port TXV maintains a constant superheat at the evaporator exit (cooling cycle) resulting in higher overall system efficiency.
Refrigerant system is designed to provide dependability. Liquid filter driers are used to promote clean, unrestricted operation. Each unit leaves the factory with a full refrigerant charge. Refrigerant service connections
make checking operating pressures easier.
High and Low Pressure Switches provide added reliability for the compressor.
Indoor and Outdoor coils are computer-designed for optimum heat transfer and efficiency. The indoor coil is fabricated from copper tube and aluminum fins and is located inside the unit for protection against
damage. The outdoor coil is internally mounted on the top tier of the unit.
Low sound ratings ensure a quiet indoor and outdoor environment with sound ratings as low as 69dBA.

Electrical
Hertz 60
Phase 3
Voltage 208/230
Specification
Condenser Air Flow Vertical
Metering Device TXV
Refrigerant R-410A
Tonnage 3.5
Blower Motor Type ECM
Compressor Type Scroll
Condensate Connection Size 3/4"
Condenser Motor Type PSC
Cooling Stages 2
Safety Standards
California Prop 65 Yes
Hazardous Material No
Weights and Dimensions
Operating Weight (lbs) 444
Exterior Dimensions (D) (inches) 48.250000
Exterior Dimensions (W) (inches) 44.190000
Exterior Dimensions (H) (inches) 48.750000
Shipping Weight (lbs) 465.000000
General
Tier Performance