Bryant Legacy™ Multipoise Furnace, 92% AFUE, Single Stage, 18 Speed ECM, 60,000 BTU, 115/1

Item
912SE36060M14
  • California Prop 65

Bryant® delivers the perfect balance of economy and lasting efficiency with our most attractively priced 90% or better gas furnace. The model 912S reliably heats your home at up to 92.1% AFUE, and is backed by more than a century of excellence.

The 912SD Multipoise Legacy™ 92 Condensing Gas Furnace features asingle-stage gas valve and ECM blower motor. The fixed-speeds, constant torque (FCT) ECM blower motor is at the heart of the electrical efficiency provided by this furnace. With an Annual Fuel Utilization Efficiency (AFUE) of 92.1% AFUE, the Legacy™ single-stage gas furnace provides added savings over standard, non-condensing gas furnaces. This Legacy Gas Furnace features 4-way multipoise installation flexibility, and is available in nine model sizes. The 912SD can be vented for direct vent/two-pipe, ventilated combustion air, or single-pipe applications. A Bryant Legacy thermostat and Legacy Air Conditioner or Heat Pump, can be used to form a complete Legacy Series System. All sizes are design certified in Canada. All sizes are design certified for use in Manufactured Housing (Mobile Home) applications when used with factory-approved MH accessory kit.

PERFORMANCE
• Fixed-speeds, constant torque (FCT) ECM blower motor for electrically efficient operation all year long in heating, cooling and continuous fan operation.
• Single-speed inducer motor, and single-stage gas valve.
• Silicon Nitride PerfectLight™Robust Hot Surface Ignitor.
• Adjustable blower speed for heating and cooling.
• Aluminized-steel primary heat exchanger.
• Stainless-steel condensing secondary heat exchanger.
INSTALLATION FLEXIBILITY
• 4-way multipoise design for upflow, downflow or horizontal installation, with unique vent elbow for 12 different venting options, including optional venting through-the-cabinet downflow venting capability.
• Factory-configured ready for upflow applications.
• Ideal height 35” (889 mm) cabinet: short enough for taller coils, but still allows enough room for service.
• Direct-vent/sealed combustion, single-pipe venting or ventilated combustion air.
APPLICATIONS
• Approved for Twinning applications with accessory kit (42060E17, 048080E17, 060080E21, 60100E21, 60120E24 models, only).
• Approved for Manufactured Housing/Mobile Home applications with MH accessory kit.
• Convertible to propane with gas conversion accessory kit.
CERTIFICATIONS
• All sizes meet ENERGY STAR® South regional standards.
• Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193.
• All sizes can be installed in California air quality management districts with a 40 ng/J NOx emissions limit.

Specification
Fuel Type Natural Gas, Convertible to Propane
Stages Single Stage
Number of Burners 3
Heat Exchanger Type Aluminzed Steel
Gas Connection Size 1/2 - NPT
AFUE 92.1
BTU Output 56000
BTU Input 60000
Blower Speeds Fixed-Speeds, Constant Torque ECM
Blower Motor Type Multi-Speed ECM
Electrical
Hertz 60
MCA 7.5
MOCP 15
Phase 1
Voltage 115
Safety Standards
California Prop 65 Yes
Hazardous Material No
Weights and Dimensions
Operating Weight (lbs) 28
Exterior Dimensions (D) (inches) 29.500000
Exterior Dimensions (W) (inches) 14.200000
Exterior Dimensions (H) (inches) 35.000000
Shipping Weight (lbs) 128.000000
General
Tier Legacy