Bryant Legacy 7.5 Ton, 11 EER, Package RTU Gas Heat/Elec Cool, Two Stage Cooling 208/3

Item
580JP08D125A2A0AD
  • ETL Certified
  • California Prop 65

580J  Legacy Single-Packaged Standard Efficiency Gas Heating/Electric Cooling Rooftop Unit with Puron® Refrigerant

Durable Economic Comfort for Commercial Building Applications

The 580J rooftop units were designed by customers for customers. With a gauge plug, centralized control center, plug & play accessory board, “no-strip screw” collars, and handled access panels, we’ve made the unit easy to install, easy to maintain, and easy to use. Units are pre-wired and pre-charged with environmentally sound Puron® (R-410A) refrigerant at the factory. The units are factory tested in both heating and cooling modes.
 
FEATURES AND BENEFITS
• Single circuit, single stage cooling model on 6 ton
• Single circuit, 2-stage cooling models are available from 7.5 to 10 ton.
• Dual circuit 2-stage cooling stage models are available from 7.5 to 15 ton.
• EERs up to 11.1 with IEERs up to 12.8
• 2-speed indoor fan motor system automatically adjusts the indoor fan motor speed between cooling stages. Standard on all
580J*08-16D/F/K/M units for installation in the United States to meet the Department of Energy (DOE) efficiency standard of
2018. Factory option for all 580J*08-16D/F/K/M unit installations outside the United States. 580J*08/09/12/N or P units meet the
DOE 2018 efficiency standard without the 2-speed indoor fan motor option.
• Utility connections are the same because 6 to 12.5 ton units fit on existing Bryant rooftop curbs. This saves time and money on
replacement jobs.
• Standardized components and layout. Standardized components and controls make service and stocking parts easier.
• Scroll compressors on all units. This makes service, stocking parts, replacement, and troubleshooting easier.
• Field convertible airflow (6 to 15 ton). Being able to convert a unit from vertical airflow to horizontal makes it easy to overcome
job site complications. A 15 ton model requires a simple supply duct cover to field convert from factory vertical to horizontal.
• Easy-adjust, belt-drive motor available.
• Provisions for bottom or side condensate drain.
• Capable of thru-the-base or thru-the-curb gas line routing.
• Single-point gas / electrical connection.
• Internally sloped, composite drain pan sheds water; and won’t rust.
• Standardized controls and control box layout. Standardized components and controls make stocking parts and service easier.
• Tool-less filter access door.
• Clean, large, easy to use control box.
• Color-coded wiring.
• Large, laminated wiring and power wiring drawings which are affixed to unit make troubleshooting easy.
• Single, central terminal board for test and wiring connections.
• Fast-access, handled, panels for easy access on normally accessed service panels.
• “No-strip” screw system guides screws into the panel and captures them tightly without stripping the screw, the panel, or the unit.
• Mechanical cooling (115°F to 40°F or 46°C to 4°C) standard on all models. Winter Start Kit allows cooling operation down to
25°F (–4°C) and Motormaster® option to –20°F (–29°C).
• High efficiency, gas heat with induced-draft flue exhaust design.
• Induced draft motor ensures no flue gas can escape into the indoor air stream.
• Bryant designed naturally draining heat exchanger, unlike positive pressure heat exchangers, do not need to be periodically, manually drained. This saves labor and maintenance expense.
• 2-in. (51 mm) disposable filters on all units.
• Refrigerant filter-drier on each circuit.
• Each circuit is protected with a high and low pressure switch.
• Many factory-installed options ranging from air management economizers, 2 position dampers, plus convenience outlets, disconnect switches and smoke detectors.
• Standard (limited parts only) Warranty: 10 yr. aluminized heat exchanger, 5 yr. compressor, 3 yr. Novation® condenser coil, 1 yr.
parts.
• Factory-installed Perfect Humidity™ dehumidification system on all sizes with round tube / plate fin condenser coils, includes
Motormaster I controller.
 
Electrical
FLA 1.5
Hertz 60
LRA 83
MCA 42
MOCP 50
Phase 3
RLA 13.6
Voltage 208/230
Specification
Heat Exchanger Type Aluminum
High Pressure Switch Yes
IEER 12.8
Ignition Type Direct-Spark
Low Pressure Switch Yes
Metering Device Acutrol
Gas Type Natural Gas
Net Cooling Capacity 83000
Net Heating Capacity 103000
Refrigerant R-410A
Rows 2
Rows/FPI 17
Sound Level 82
Tonnage 7.5
Condenser Motor HP 0.25
Blower Motor Type 2 speed Belt Drive
Blower Speeds 2
Blower Wheel 15 X 15
BTU Output 90000
CFM 3,000
Compressor Type Scroll
Condensate Connection Size 0.75
Blower Motor HP 2.9
Condenser Motor Type Direct Drive
Condenser RPM 1100
Cooling Stages 2
EER 11
Filter Size (4) 16x20x2
Gas Connection Size 1/2" NPT
Gas Heating 125000
Safety Standards
California Prop 65 Yes
ETL Certified Yes
Weights and Dimensions
Operating Weight (lbs) 835
Exterior Dimensions (D) (inches) 88.130000
Exterior Dimensions (W) (inches) 59.500000
Exterior Dimensions (H) (inches) 41.250000
Shipping Weight (lbs) 875.000000
Warranty
Compressor Warranty 5 Year
Parts Warranty 1 Year
General
Tier Legacy