Bryant 2 Ton, 15.2 SEER2, R454B, Package Rooftop Heat Pump, Two Stage, 208/1

Item
605ENXB24000
  • California Prop 65
Single-Packaged Products with Energy-Saving Features and Puron Advance™  refrigerant. 

• Up to 15.5 SEER2 / Up to 11.5 EER2 at 95°F (35°C) OD
• Up to 7.7 HSPF2
• Factory-Installed TXV
• Multi-speed ECM Blower Motor - Standard
• Sound levels as low as 71dBA
• Two Stages of Cooling/Heating
• Dehumidification Feature - Standard
• Cabinet air leakage of 2.0% or less at .5 in. W.C. when tested in accordance with ASHRAE standard 193
• Refrigerant leak detection dissipation system for added safety

Features/Benefits
One-piece heat pump unit with optional electric heater, low sound levels, easy installation, low maintenance, and dependable performance.  Bryant’s unique refrigerant designed to be environmentally balanced. Puron Advance is  an HFC refrigerant which does not contain chlorine that can harm the ozone layer. Puron Advance refrigerant is in service in millions of systems proving highly reliable and is non-ozone depleting. This unit is designed and tested with Puron Advance and contains a dissipation system.

Easy Installation
Factory-assembled package is a compact, fully self-contained, electric cooling unit that is prewired, pre-piped, and pre-charged for minimum installation expense. These units are available in a variety of standard cooling sizes with voltage options to meet residential and light commercial requirements. Units are lightweight and install easily on a rooftop or at ground level. The high tech composite base eliminates rust problems associated with ground level applications. 

Innovative Unit Base Design 
On the inside a high-tech composite material will not rust and incorporates a sloped drain pan which improves drainage and helps inhibit mold, algae and bacterial growth. On the outside metal base rails provide added stability as well as easier handling and rigging.

Convertible duct configuration
Unit is designed for use in either downflow or horizontal applications. Each unit is converted from horizontal to downflow and includes horizontal duct covers. Downflow operation is provided in the field to allow vertical ductwork connections. The basepan seals on the bottom openings to ensure a positive seal in the vertical airflow mode.

Efficient operation High-efficiency design offers SEER2 (Seasonal Energy Efficiency Ratios) of up to 15.5 and HSPF2 of up to 7.7. (See page 3)

Durable, dependable components 
Scroll Compressors have 2 stages of cooling/heating and are designed for high efficiency. Each compressor is hermetically sealed against contamination to help promote longer life and dependable operation. Each compressor also has vibration isolation to provide quieter operation. All compressors have internal high pressure and overcurrent protection. 

Multi-speed ECM Blower Motor is standard on all models. 
Direct-drive PSC (Permanent Split Capacitor) condenser-fan motors are designed to help reduce energy consumption and provide for cooing operation down to 40°F (4.4°C) outdoor temperature. low ambient kit is available as a field-installed accessory.

Thermostatic Expansion Valve - A hard shutoff, balance port TXV maintains a constant superheat at the evaporator exit (cooling cycle) resulting in higher overall system efficiency. 

Refrigerant system is designed to provide dependability. Liquid filter driers are used to promote clean, unrestricted operation. Each unit leaves the factory with a full refrigerant charge. Refrigerant service connections make checking operating pressures easier. Factory-installed leak detection dissipation system for added safety.

High and Low Pressure Switches provide added reliability for the compressor. 

Indoor and Outdoor coils are computer-designed for optimum heat transfer and efficiency. The indoor coil is fabricated from tin-plated copper tube and aluminum fins and is located inside the unit for protection against damage. The outdoor coil is internally mounted on the top tier of the unit. 

Low sound ratings ensure a quiet indoor and outdoor environment with sound ratings as low as 71dBA.

 

Electrical
Hertz 60
MCA 17.4
MOCP 25
Phase 1
Voltage 208/230
Specification
High Pressure Switch Yes
Low Pressure Switch Yes
Refrigerant R454B
Tonnage 2
Blower Motor Type ECM
Compressor Type Scroll
Condensate Connection Size 3/4"
Cooling Stages 2
Safety Standards
California Prop 65 Yes
Weights and Dimensions
Operating Weight (lbs) 382
Exterior Dimensions (D) (inches) 32.625000
Exterior Dimensions (W) (inches) 48.190000
Exterior Dimensions (H) (inches) 51.750000
Shipping Weight (lbs) 393.000000
Warranty
Compressor Warranty 10 Year (When Registered in Residential Application)
Parts Warranty 10 Year (When Registered in Residential Application)
General
Tier Preferred