ADP Nominal 3 Ton, Horizontal 17.5" Wide P15 A-Coil, Aluminum, Non-Bleed TXV

Item
C36H175P159
  • California Prop 65

Product Features:
· Short cabinet with easy access.
· High efficiency lanced fin design.
· R-410A threaded TXV installed.
· Copper refrigerant connections for easy brazing on both copper and aluminum slab models.
· Dual 3/4" FPT condensate drains on front and back of coil allows flexibility of placement to accommodate left or right airflow furnaces.
· Easy to remove access panel with only 4 screws.
· Non-captive panels allow access to inside of cabinet without the need to cut refrigerant lines.
· Refrigerant connections on top of coil.
· Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs, then charged with dry air.
· Copper distributor tube assembly provides brass to brass threads for trouble-free service of TXV.
· Heavy gauge painted cabinets fully lined with 5/8" foil faced insulation.
· All coils are foam packed and include bar coding on label.
· Easy to use filler strip, for use if coil dimensions are larger than furnace.
· Dedicated cutouts for condensate drains reduce air leakage.
· Intertek lab tested 1% or less cabinet air leakage for better efficiency.
· Microban® antimicrobial additive to inhibit the growth of mold and mildew in the drain pan.
· HydroTEC™ low water retention drain pan.
· UV resistant drain pans are molded of high temperature (450 deg. F) engineered polymer.
· Refrigerant connections are 3/8" ODF liquid and 7/8" ODF suction.
· Refrigerant connections in center of coil away from airflow path.

Specification
Air Flow Configuration Horizontal
Cased Yes
Coil Type A-Coil
Metering Device TXV
Refrigerant R-410A
Safety Standards
California Prop 65 Yes
Weights and Dimensions
Operating Weight (lbs) 56
Exterior Dimensions (D) (inches) 21.000000
Exterior Dimensions (W) (inches) 26.500000
Exterior Dimensions (H) (inches) 17.500000
Shipping Weight (lbs) 86.000000